Dodge Cummins Diesel Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
868 Posts
I have seen a couple leak there. One had a single piece of dirt (or something) on the mating surface between the sensor and the machined adapter. I have also seen one of the adapters that had some rough machine work where the sensor seats and caused a pretty bad leak under pressure. I would remove the sensor and check the mating surfaces.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top