Cummins Diesel Forum banner

loses all power cruising 01 cummins

823 Views 7 Replies 5 Participants Last post by  ALLDIESEL
We have a 01 dodge xcab lb cummins w/135k and you will be driving down the road and it loses power. It is like you have lifted your foot off the footfeed. It has a new lift pump and vp44 about 1 year ago and the low side fuel pressure is 15lbs and the volume is good. We put a new ecm from dodge. We are getting a p0234 and a p0237. We replace the tp sensor and map with a good one. The scan tool shows the vehicle load going down to 0 when it acts up. The tach does go down to 0 interm but necessarily when it acts up. We think a cam sensor will take care of that but dont think it will solve our real problem. There is not any performance parts on it yet. Any help would be great!
1 - 2 of 8 Posts
Same exact problem with same code?????????? need help also.
Local shop swore to me it was the apps without putting a scan tool on it but thats not the code I get. Dont feel like spending 500 bucks for nothing. Ill start digging for wire connections.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.