Cummins Diesel Forum banner

looking for single turbo to replace tow twins

599 Views 7 Replies 5 Participants Last post by  jp8819
my turbos are in serious need of a rebuild im looking to replace them with a single just to keep it on the road the mods i have are whats in sig any help would be greatly appreciated
thanks
kurtis
1 - 8 of 8 Posts
my turbos are in serious need of a rebuild im looking to replace them with a single just to keep it on the road the mods i have are whats in sig any help would be greatly appreciated
thanks
kurtis
You could do a 62/71/14 which would work good.
Yeah I say 62/71/14 for those 155's
how many miles you have on the tow twins?
around 50k but there is some serious play in the shafts on both turbos they are making some terrible noise
talked with dave from bd and he says i have out grone them any way also i do some heavy towing with the truck on occasion
The turbo I posted is tow friendly. You may need to turn the Adr and Smarty down while towing though. You will just have to see how it runs.
depending how much fuel you are pushing or what you are doing with the truck you could use a 62/65/14 if you prefer faster spool up down side it will be hotter when running it hard all out. My 62/71 is not bad and I tow with it you just have to remember with the 5spd you are going to lose all your boost between shifts so it will be slower spooling than your tow twins.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top