Dodge Cummins Diesel Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
287 Posts
Discussion Starter · #1 ·
ok guys, i just about have my car sold, now its time to start on my truck, my goal is to have 600 or more horsepower and be able to do truck pulls, and some light towing with it, i already have a dual disk south bend clutch, and i'm lookin to ditch the edge and go with a smarty/mp-8 stack, and an airdog 150, so what other sugg. you guys have with the turbo and injectors and what else i will need to do???
 

·
Valair Clutch
Joined
·
2,342 Posts
Do the smarty MP8 stack like you mentiond then some 90 horse injectors and a super phat shaft 62 and that should get you pretty close. Maybe a arson 3 kit and a intercooler to help out with the egts

Or go with a bigger turbo like me so you will have growing room. I did 615 with my mp 8 off with what's n my sig and its just getn started
 

·
A Couple Diesels
Joined
·
3,099 Posts
easy-
stocker/s400 twins
extrude hone your tips to ...90 hp tips
smarty
studs
fuel pump


maybe an arson kit
 

·
Registered
Joined
·
287 Posts
Discussion Starter · #4 ·
i've seen people talk about the stock, with the s400, who makes this kit, i'd like to check it out
 

·
A Couple Diesels
Joined
·
3,099 Posts
YES an AWSOME kit!!!!

Mpi or Wicked diesel
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top