Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter · #1 ·
Hey, I just installed a 2 inch leveling kit (spacers) in my 05 4x4 and now have a loud popping noise when I turn and also a creaking noise when I hit a bump. The truck only has 22000 miles on it and was noise free before the kit. I also used the lazar smith track bar bushings. I checked all my bolts and everything is tight. Ideas?
 

·
Registered
Joined
·
70 Posts
I second the track bar, not sure what the spec is on it but it needs to be really tight.
 

·
Registered
Joined
·
3,397 Posts
REEEEEEAAAAALLLLLYYYY tight. Seems they work just loose enough to pop.
 

·
Registered
Joined
·
88 Posts
Discussion Starter · #6 ·
I took it to the alignment shop and all was ok. I had two different size washers that came with the track bar bushings that I didn't put in because the bar fit snug in the brackets. Do I NEED to squeeze them in?
 
1 - 6 of 6 Posts
Top