Cummins Diesel Forum banner

Keyless entry door pad?

7667 Views 12 Replies 4 Participants Last post by  DodgeLuvr
Hey guys, Ive got an 04 that I want to add a keyless entry pad on the drivers door like the fords have. I am looking for an aftermarket kit that I could add without doing alot of modifying.
I saw a kit one time that had a wireless pad that attached to the door with 3m tape and then a module that wired in under the dash, this is exactly what I'm lookin for. Does anyone know where to find one??
I know bulldog used to make one but im not sure about how the quality would be, there are some negative reviews about it on amazon and it seems to be a discontinued product from bulldog.
Heres a link. Amazon.com: Bulldog TP-100 Touch Pad Keyless Entry System: Automotive

I also found this kit, it looks really good but it has to drill through the door panel. The wiring harness also has to pass through the door jamb, I think it would eventually end up causing problems there, with pinched wires ect.
Keypad Keyless Entry: A1 Electric Online Store
Automotive keypad keyless entry system

Has anyone else installed something like this, or know of any other manufactures that make something like this??
Thanks Alot.
Dallas
1 - 3 of 13 Posts
as for wire through the door jamb, thats how speaker wires and electric window controlls get their power and such route it the same way and they wont pinch
there is a diagram on how to route the wire through the doors in here

http://www.cumminsforum.com/forum/3rd-gen-non-powertrain/130727-indash-nav-stereo-upgrade.html
Thanks for such wonderful commends Pyro!! :thumbsup: But the fact remains that the factory wires DO run through the door jamb.
1 - 3 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top