[Silver Pig]

Just got done installing the shibby boost tube and grid heater delete and at the same time threw on the qzilla boost fooler. I have juce with attitude and before I was spiking at 36-37psi and was hanging at 31sh psi at WOT. Now I am spiking at 24psi and its staying at 24psi. EGT's seem to be down about 50deg or so with edge on 6, it wont get over 1500deg.

Is this normal?

Fooler is plugged in like this: sensor, edge, fooler, stock map plug.

I also unplugged the fooler and went out on just the Edge on 6 and with the boost tube and grid heater delete I spike at 35psi and hold 30psi so I can see the extra flow works!

Sean

 

[bigred8080]

same thing happened to me, if u havent figured it out yet, you have to switch the plugs around, it needs to be the other way around with your edge and fooler i believe

 

[txpipesurv]

If you are using the edge as your boost guage instead of a mechanical guage, I think your reading will be off. The fooler works by telling the truck that it isnt making full boost so it makes more. Your edge is probably reading what the fooler is sending to the ecm, not what the truck is actually making. Mine did the same thing when I had my boost fooler on with my edge.

 

[MEZ]

If you are using the edge as your boost guage instead of a mechanical guage, I think your reading will be off. The fooler works by telling the truck that it isnt making full boost so it makes more. Your edge is probably reading what the fooler is sending to the ecm, not what the truck is actually making. Mine did the same thing when I had my boost fooler on with my edge.

:ditto: :thumbsup:

 

[Silver Pig]

That makes sense because with the fooler my EGT's are down.

Thanks!

Sean