Dodge Cummins Diesel Forum banner
1 - 16 of 16 Posts

· hydraulic lifter crew
Joined
·
13,324 Posts
Discussion Starter · #1 · (Edited)
anyone have instructions for this install?
this is the only one out of the three without instructions.
...and yes i looked on diesel manor and i didnt see it. please tell me its there !!

isspro doesnt even have this one listed on their website install page.

has a weird adapter plug on it.
never seen one before ( the gold thing )







 

· DIESEL FREAK
Joined
·
150 Posts
OK the gold thing is the sending unit for the gauge on top of you oil filter housing is a little bolt take that out and put that gold sending unit there and use Teflon tape.then in stall the gauge as normal.

PS you mite need a reducer for the sending unit to the that hole in the top of the housing.
 

· DIESEL FREAK
Joined
·
150 Posts
here is the place of the bolt
 

Attachments

· Registered
Joined
·
173 Posts
So how do you install this if you are running the BMK 13?
 

· DIESEL FREAK
Joined
·
150 Posts
you would put a 3-way t in ther and it will read the same
 

· DIESEL FREAK
Joined
·
150 Posts
like this one
 

· Registered
Joined
·
173 Posts
Ok cool thats what I thought just wasn't sure how it would effect pressure.
 

· DIESEL FREAK
Joined
·
150 Posts
just when you put the t on stand it up and put the sending unit on top and run you bypass line of the center port and what will happen the oil psi will hit the sending unit first
 

· Registered
Joined
·
173 Posts
Pressure is pressure is pressure. Its the same thru out the circuit. So you could have 2 tees tied together and still get the same pressure. Just throwing that out there.
 

· hydraulic lifter crew
Joined
·
13,324 Posts
Discussion Starter · #11 · (Edited)
OK the gold thing is the sending unit for the gauge on top of you oil filter housing is a little bolt take that out and put that gold sending unit there and use Teflon tape.then in stall the gauge as normal.

PS you mite need a reducer for the sending unit to the that hole in the top of the housing.

thanks 05sltcummins ! appreciate it.
this helps out.

so when you take the bolt out, oil doesnt squirt out everywhere does it ?

LOL

here a few pics of the rest of the gages.
real nice gages!







 

· Registered
Joined
·
122 Posts
Those will look much better out of the plastic and in the truck!!!!!!:thumbsup
 

· DIESEL FREAK
Joined
·
150 Posts
no it wont as long as the truck is not runnig when you do it.!!!!!!!!!!!!!!!!!

that would just be stupid but i have seen it happen.
 

· DIESEL FREAK
Joined
·
150 Posts
did't hurt to ask thou
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top