[smailman]

would a banks high ram off of a 3rd gen fit on a second gen?

 

[blue02lbcummins]

i know you can modify a second gen intake to fit a 3rd gen but i dont think the other way around. plus you want to say away from banks. its dyno proven to flow less air than a stock manifold. if you really want a good intake manifold look up Byrd's diesel off of ebay. there made to order with 3 ports and powdercoated the color of your choose for under $200. i have one its a real quality American part

 

[Broke Down]

it will mount but will be the wrong angle to accept the silicon boot from the intercooler

 

[smailman]

ok thank i was jw cuz my buddy has one on his truck but hes getting a new innercooler and wont be able to use it anymore and he was going to give it to me if it would fit

 

[TURBOLVR]

it will mount but will be the wrong angle to accept the silicon boot from the intercooler

3rd gens are near straight down and the 2nd gen is a bit more angled to the front. I'll take it for free.

 

[scow1]

Just order the 45 degree intercooler boot. I am running a cfm+ from a third gen and it works fine with the tunnel ram to make it even a crappier angl and it still works. The boot cost less than 15 bucks.