Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Premium Member
Joined
·
708 Posts
Discussion Starter · #1 ·
OK I installed my Trans-Go shift kit that I bought like 2yrs ago. Not really impressed with the results but it does work;except for the lock-up. I followed the directions to the letter and all went pretty smooth until I put the vb back together. On the vb there is a removeable bracket that keeps the TV valve spring in place. Well I didn't lose that spring but the one beside it. Didn't have alot of time to waste so I used a spring in the kit to replace it. Yes I looked all over for it but could not find it. I know that is probably the reason for my lock-up not working. Has anyone else done this? Anyone dealt with the Trans-Go folks or should I just beg for one at the local tranny shop?
 

·
Registered
Joined
·
36 Posts
Spring

Yep, that spring regulates the switch valve which regulates line pressure for lockup. You need that OE spring in order to make it work again.:peelout

What exactly didnt impress you with the TG kit?
 
1 - 2 of 2 Posts
Top