Cummins Diesel Forum banner

Inst. cluster lamp replacement

517 views 2 replies 3 participants last post by  JWH_03_Dodge 
#1 ·
How do you access the back of cluster to replace the bulbs?
 
#3 ·
you'll have to remove the panel that the headlight switch is installed in, as well as the center dash panel.

After you remove both of those, remove the top 2 screws that hold the instrument cluster bezel in place, and remove the cluster bezel.

There are 4 screws that hold the cluster in place. Remove these. pull the cluster out and disconnect harnesses to get the rest of the way out.

hope that helps :thumbsup:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top