[Tuck 5.9]

Fellas, I'm new to the Mobile area and I need to find a place that can test / work on my injectors. I actually live in the Foley area, but I dont want to deal with any dealerships. Im hoping to find a good diesel mechanic shop that can test them and go from there. Any help would be greatly appreciated.

 

[loydmp]

On the service rd beside 65 north is a diesel shop that is pretty good to work with. They replaced my CP3 pump for me while I was working down there. I can't remember the name of it, but it's right beside the Sherman Williams paint store. They were real nice to me, and for the work they did pretty reasonably priced.

 

[mudn_1]

I'd give suncoast in ft. walton a call

What problems are you having? there are very few in the country that can reman CR injectors.... you can pull them and send them to Jeff garmon in GA.... or send them to me and I'll get them checked for you....

chances are if you are having hard start issues its the return on the injectors are leaking back too much fuel and you will have to buy new ones anyways.... do it right and buy new updated ones with the SS bodies and all the fiixes

 

[biopoweredcummins59]

I had mine checked at "Test Calibration" They seemed to know what they were doing and charged 10$ per injector plus the cost of the copper washers so it was 70$ by the time it was said and done to test all 6. They are off the 65 service rd, like the west side across from the Cummins Place.