[Jkelley82]

Sent from AutoGuide.com Free App

 

[me78569]

If you need......? A bottle of ky to get the injectors in?






for the records KY works great with seating gas fuel injectors. Glad I could help

 

[Jkelley82]

I just noticed that I screwed up and put my whole question on the title area. Is there any way to fix this?

My question is do I need to replace feed tubes and where is the best place to get everything
Sent from AutoGuide.com Free App

 

[BlackedOut02]

Whats your question?

 

[Shainer]

If you need......? A bottle of ky to get the injectors in?






for the records KY works great with seating gas fuel injectors. Glad I could help

What happened to dinner and drinks first?

 

[me78569]

What happened to dinner and drinks first?

Nah just lube them up and jam em in.


The orings that is :rof


As for Feed tubes. Just get new orings and call it good.

 

[Jkelley82]

Thanks guys, and sorry for my f***d up post

Sent from AutoGuide.com Free App

 

[BigRed2500]

If the injectors are new, the coppers are good. If their used, get new copper washers. And yes the connector tube o rings as well. That's all you'll need
A trick to keep the new washer on the injector when you put it in, take just a drop of oil on your finger and put it on the base at the end of the tip. Not the tip base, the body base the copper presses against. Then slide your new copper on and the oil will help it stick and stay put to install.

 

[Cumminspal]

There are some early serial numbers that require new fuel connectors when replacing injectors. I don't remember the cut off though.


Sent from AutoGuide.com Free App

 

[Jkelley82]

Has anyone used dieselautoperfomance.com they seem to have the best price..

Sent from AutoGuide.com Free App

 

[Danderson]

Get yourself an Edge EZ and a boost elbow to make the best of the injectors. My '98.5 just got hot w/Mach 1.6's without the EZ. Combination gave me a quick,clean running truck.

 

[Shainer]

Has anyone used dieselautoperfomance.com they seem to have the best price..

Sent from AutoGuide.com Free App

DAP is a good vendor. You can request a quote from them on the forum. They can also answer any questions you have. Just don't mention the KY, or dinner for that matter.

 

[Jkelley82]

Great. Thanks for the responses. I have an edge jwa, boost elbow, 4" exhaust, and 3pc manifold. The injectors should be a nice addition. What do yall think

Sent from AutoGuide.com Free App

 

[Marq92]

I'd start saving for trans upgrades, torque converter, valve body, rebuilt kit, etc.

 

[Jkelley82]

That's what I was thinking and afraid of.

Sent from AutoGuide.com Free App

 

[BlackedOut02]

Cummins is alawys the best place for gaskets, seals, orings, ext.