Dodge Cummins Diesel Forum banner

Hrvp

1194 Views 14 Replies 5 Participants Last post by  24valvin
what goes best with a hot rod vp for big power?
1 - 15 of 15 Posts

· Registered
Joined
·
1,001 Posts
I have an AirDog 150, I hear the AirDog2 150's are adjustable and have a better drawstraw setup.

However I have to say that my AirDog is quite reliable and flows more than my engine can consume. For big power with a Hot Rod VP I would suggest getting the air seperator unit.
 

· Registered
Joined
·
800 Posts
Discussion Starter · #4 ·
about 600-700 hp. wire tap boxes are no good so? big injectors and smarty?
 

· Got P7100?
Joined
·
6,489 Posts
about 600-700 hp. wire tap boxes are no good so? big injectors and smarty?
ON fuel??:shock: Its gonna be tough with a hrvp, they arent really big # pumps. Monster, dragonflow or the bd 100 pumps are probably the only way your gonna get there on #2 alone. Now there are other options to get you there...:lol4:
 

· Got P7100?
Joined
·
6,489 Posts
Most add timing, so you cant add any more timing or you could/will hurt performance. You can tap the wire and might see a little gain from it, but not like an so or ho pump. You lookin to put a new pump on?
 

· Registered
Joined
·
800 Posts
Discussion Starter · #10 ·
so whats the best setup to run with the hot rod???
 

· Got P7100?
Joined
·
6,489 Posts
Id just go with some 240hp injectors, a 66 or 71mm single or twins if its a dd, cam, valve springs, o-ringed head and some go juice:nos:
 

· Registered
Joined
·
800 Posts
Discussion Starter · #13 ·
thanks mathews, how does the smarty do with the hrvp and big injectors?
 

· Registered
Joined
·
53 Posts
so if the hrvp adds timing should i be running my smarty on the even numbers?
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top