[tclappcummins]

I realized today when i hit the lock button that my driver's side front turn signal bulb is out... here is the question do I have to remove the entire head light assembly to change that bulb or is there an easier way? please help!

 

[BILLS06]

Yes, you'll have to remove the entire assembly. I'll post some pics on what to do. Be a sec.

 

[Cumminsturbo22]

you have to drain the blinker fluid first........

 

[BILLS06]

Need a screwdriver to remove the plugs inside the fenderwell, a shallow and deep 10mm socket, 3" wobble and reg extensions, & a 3/8" ratchet

 

[dom42]

its just tooooo easy...........good luck. and just follow those pic's ^^^^^^

 

[tclappcummins]

you have to drain the blinker fluid first........

I was low on it thats why I think the bulb went out

 

[Cumminsturbo22]

wow good post bills06

 

[tclappcummins]

Need a screwdriver to remove the plugs inside the fenderwell, a shallow and deep 10mm socket, 3" wobble and reg extensions, & a 3/8" ratchet

THanks a lot man! good write up!

 

[BILLS06]

Just helping to make it easier for the rest of the community!!!! Oh yeah, might take a little tug to remove the assembly.

 

[tclappcummins]

ok thanks I dunno why this truck does it but I have replaced both rear turn signals and now im replacing the front turn signal..... and the truck only has 34k on it.. and I have made sure and always keep plenty of turn signal fluid in it

 

[Cumminsturbo22]

haha my bulb at 34 gave out too!

 

[BILLS06]

I had to replace both license plate lamps the other day after about 7 months since the last time.

 

[BILLS06]

Need a screwdriver to remove the plugs inside the fenderwell, a shallow and deep 10mm socket, 3" wobble and reg extensions, & a 3/8" ratchet

Any moderators want to move this quote to the tech pages? It's not letting me start a new topic!!!!!

 

[talldaddy]

This is crazy, I just took out the three bolt and there is a plastic tab at the upper, rear portion of the headlight assebly that has two small wings which need to be squeezed to let it out of the hole. There is NO way to reach it, I can see it behind the fuse box and can see in from the fender, but it has tabs on the top and bottom of the plastic post. WRF dodge, let's make it a little harder to change a bulb!

 

[sugarkid_99]

I know how you feel, I had to look up how to change the bulb, makes me feel dumb! :confused013:

This is crazy, I just took out the three bolt and there is a plastic tab at the upper, rear portion of the headlight assebly that has two small wings which need to be squeezed to let it out of the hole. There is NO way to reach it, I can see it behind the fuse box and can see in from the fender, but it has tabs on the top and bottom of the plastic post. WRF dodge, let's make it a little harder to change a bulb!

 

[dom42]

u actually just gotta yank it and it will squeeze out...its designed to come in and out

 

[underp2]

searching ...

u actually just gotta yank it and it will squeeze out...its designed to come in and out

searching for a front signal change thread. Does anyone still have these pictures? Thanks for the help.

Pete