Cummins Diesel Forum banner

hooking up the wastegate

5140 Views 10 Replies 4 Participants Last post by  USARMY12V
My wastegate has been plugged by the po. I was wondering how i would go about hooking that back up? thanks for any advice
1 - 2 of 11 Posts
All of the '98s I've worked on have just a short line from the compressor side of the turbo to the wastegate actuator.
Even on all the earlier years it's hit or miss whether the WG has the short line or a line up over the engine.
would like to regulate it
Then get one of these> Adjustable Boost Elbow
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.