[2500calgary]

Anyone ever install these? Is it a pain in the a$$?

 

[Arek]

I just did a set last weekend, took about 2 hours for the headlights and about one hour for the foglights, i also readjusted the headlights about 4" lower cuz i was getting flashed on the hightway

 

[diggerdave]

i should have mine in a couple weeks,,then i'll have to have ya show me how to do that also arik with the adjusting the lights so no more fingers haha

 

[19Fury69]

Maybe we should have an HID party, I think I'm gonna order up a set on the 1st

 

[chrome it up]

What brands are you guys ordering? Just curious.

 

[2500calgary]

Don't know... don't know a damn thing about them, where to get them, how much they should cost, etc... if anybody can suggest anything that would be awesome!

 

[SootKing]

heres mine...adjusting the bulb to make sure highs go up and lows go down and the angle of the beam is the hardest most pain in the azz part...http://www.cumminsforum.com/forum/94-98-non-powertrain/109548-my-new-8000k-s.html wow computer glitch

 

[khaoskustoms]

I've got a set in my truck. 6000 kelvin. They are very nice. If your truck has a single bulb high and low beam, make sure you get the dual filament HID, some HID's are just single filament and for the low beam they pivot the filament down and high beam it moves up. From experience I find that they don't work very well in our climate. My 2 cents.

 

[diggerdave]

I've got a set in my truck. 6000 kelvin. They are very nice. If your truck has a single bulb high and low beam, make sure you get the dual filament HID, some HID's are just single filament and for the low beam they pivot the filament down and high beam it moves up. From experience I find that they don't work very well in our climate. My 2 cents.

wheres yur shop?

 

[Flanman55]

His shop is in Stony Plain