Cummins Diesel Forum banner

HID flicker solution?

4735 Views 7 Replies 4 Participants Last post by  BigRedRam95
So i installed a pair of HIDs in my 08 cummins and got the typical "HID flicker" issue. i read around about it and then searched online for a harness that might work without having to hack into any wires that i dont have to. and i found this. 4th item down;

HID Ultra Slim Anti Flicker Capacitor

will this work as it has a capcitor in it and looks to be wired just like everyone else is wiring it?
1 - 2 of 8 Posts
Do u have load resistors on your HID kit? If not get them and look in the thread i posted how to wire them in.
this should fix it.
160622717287 here is a ebay item that i installed for my Bi-Xenon kit.
plus resistors. this harnes will make your Lo beams stay on if you accidentally turn Hi on.
all working first try no flicker.... 50w 6ohm resistors from rbay. same resistors that Recon sells for $$$$$$$$$$ u can get 4 for half the price.
make sure you have resistors on both Passenger and Driver side of your truck.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.