Cummins Diesel Forum banner

HELPPPPP! truck wont start and throwing P0016 code!!!!!

4572 Views 6 Replies 3 Participants Last post by  mckenzie_t
First off ill start by whats done to the truck since my sig is a little off. Its 06 with a smarty with tnt mp8 60%nozzles cai and an airdog 150.

I had problems right after i put my nozzles in i would get on it and the "wait to start light would come on and there would be a big power lose. Then one day rolling down the interstate the truck just quit. It through the camshaft sensor code. Well i replaced it and the crankshaft sensor at the same time. One was a mopar and one was from advance auto but was a borg warner part. Now its throwing the P0016 code and wont start and just smoke white. There is fuel going to the injectors. The P0016 is camshaft/crankshaft sensor timing missalignment.

IF ANYONE CAN HELP ME PLEASE DO. truck has been down for a month and really dont want to take to the dealership.

Also i replaced the rail pressure sensor and still nothing as well as checking the fca.
1 - 1 of 7 Posts
I believe there are few write ups about crank sensor wires rubbing through along the block are sensors the correct distance from the teeth if it is adjustable along with crank sensor wires check the cam sensor wires checl them all the way back to the ecm if you have too.
Sent from my SPH-D710 using App
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.