Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Cummins of the Month Challenge!
1 - 7 of 7 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter · #1 ·
I'm wanting a smarty with a new clutch 3600 12cb sprung hub,hydro. upgrade.The few things I'm wondering what will it do to my injectors stock.I pull a fifth wheel camper 41.5' long 4 slide outs about 20,000 pounds.I know that the upgrades I want are some pretty big upgrades.I just want someone to tell me what they think.Is the upgrade worth my time and money because I don't want to pull with the wifes truck.:thud:
 

·
Registered
Joined
·
129 Posts
Discussion Starter · #3 ·
How hard aare the 100 hp sticks to install?I've never went that far into the internals yet.
 

·
Registered
Joined
·
3,263 Posts
Stock injectors are fine with the SMARTY.
The turbo is a limiting factor. Do you have a boost elbow installed? Need to get the boost up to keep the EGTs down. 35psi is about max for the stocker. Anything higher than that will shorten it's lifespan.

MikeyB
 

·
Registered
Joined
·
129 Posts
Discussion Starter · #6 ·
I don't have a boost elbow.I did go ahead and order my boost fooler.How much does a boost fooler cost and how do I get one of them?
 

·
Registered
Joined
·
129 Posts
Discussion Starter · #7 ·
not hard, just time consuming, i did mine and im far from a mechanic
I was not sure do you need any special tools for the change?
 
1 - 7 of 7 Posts
Top