Dodge Cummins Diesel Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
Having hard starts primarly when truck is cold. Truck has a new VP and FASS 95/95.
 

· Registered
Joined
·
54 Posts
Discussion Starter · #3 ·
After the wait to start light goes out and you turn the key it should fire right up. However after cranking for several seconds then stopping to let the pump cycle it will finally start after a few more seconds of cranking.
 

· Premium Member
Joined
·
1,108 Posts
After the wait to start light goes out and you turn the key it should fire right up. However after cranking for several seconds then stopping to let the pump cycle it will finally start after a few more seconds of cranking.
OK....what if you just hit the key and tried to start the truck without waiting for the light? OR if you unplugged our pump and tried to start the truck? (Obviously don’t run for very long if it starts) Does it make a difference?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top