Cummins Diesel Forum banner

goofy shifting??!! PLEASE HELP

798 Views 11 Replies 6 Participants Last post by  DieselRookie
Hello everybody, i'm new here.
I got an 05 2500 dodge quad with an auto tranny in it. It's got 133,000 miles on it and it seems to be looking for a gear a slow speeds. From a stand still it's in first for like a second and then it seems to go to 3rd and figures out it doesn't need to be in that gear and then down shifts to 2nd. Same thing going around a corner it doesn't know what gear to shift in. It seems ok once it gets goin or if I get on it. But driving around town it shifts like crap.
This is my third 2500 Dodge I had a 99 v10, 98 cummins 24 valve and now this one.
This is drivin me crazy! Are there any known issues with these and if so what are the solutions. None of my other ones did this! PLEASE HELP! Thanks
1 - 2 of 12 Posts
The BD valve body assembly will also fix this issue since it comes complete with new solenoids attached and will make that tranny shift like it should. very easy install also with 1 year parts and labor warranty. labor meaning if there is an issue they pay to have it fixed
BD Power - Product: Valve Bodies

Hey thanks,
How hard is it to put in that BD Valve body. Is it unbolt the old one and put in the new one? Or is it more involved with a bunch of springs and little parts and stuff?
no little parts or springs it is all assembled. just a very simple bolt in and comes with HD band strut gasket and filter. it takes about 1 hr for the entire set up

1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.