[kjk66ss]

i just bought some autometer ultra lite II gauges EGT,TRANS TEMP,BOOST..can anyone give me more detailed information on where to splice all the wires!for illumination (headlight dimmer switch) can i splice 3 wires(3gauges) to the 1 dimmer swith wire?next i need more help with the key-on power i dont know where to start with that so any help would be great......the boost gauge is mechanical so can anyone tell me if theres a spot i can place it with out having to drill an tap? thanks for any help

 

[kjk66ss]

i have an old gauge on my truck that has one wire going to the dimmer switch an the other is going to the fuse box can i just splice on 3 wires to that wire going to the fuse box or will i have to have a fuse for each wire

 

[silvrcummns]

Go ahead and splice the power for the lights to the dimmer switch wire. Tap your egt and trans temp to the fuse power. Then run your ground wires accordingly.

For the boost gauge you can order a boost bolt, it will replace one of the intake bolts. Check one of the site sponsors for one