[Mountain dirt]

i had a fass 95 installed but the guy who installed in just ran it into the stock filter i am wondering what the fitting that runs into the injector pump is called and if i can find one with a bigger inlet tube, at the parts store, also can i find that fitting with the barb for the fuel pressure gauge, or what are my options for that?

 

[Mountain dirt]

ummm? why would i do that? i have the f.a.s.s system not just a lift pump, it has a filter, i just need to run it straight to the injection pump, but i did not have the fitting,any one atleast know the thread size into the injection pump?

 

[Mountain dirt]

i want to bypass the filter cuz i am getting 12-13 psi at idle and it goes down to 8-9 when i hammer it, what are u guys seeing for pressure?

 

[Mountain dirt]

The thread size is 12mmx1.5.

We have fuel pressure 90* fittings that are designed for a fuel pressure tap location.


Dave

where can i get one of these 90* fittings?
thanks for the help

 

[Mountain dirt]

what is the line called that runs into the banjo bolt and where can i find a 3/8 one of those

 

[Mountain dirt]

does any one know the size of the fuel pressure sensor that is hooked to the edge attiitude?

 

[Mountain dirt]

any one? 3/8, 5/16/ or 1/4 pipe thread, maybe? i just dont want to buy extra reducer bushings for my tee or have to it apart and then run to the store