Dodge Cummins Diesel Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
289 Posts
I cant remember if the infinity used a remote on wire or not to triger the amps on and off.Did you cut off the factory ends? I hope not.I think the metra harness was a 70-1858 and other 1 I sold was a cr01b.they plug into your factory harnes to install a aftermarcket headunit.Some infinity amps you could only hook up the positive wire to each speaker (and not the ground)
 

· Registered
Joined
·
289 Posts
If you did buy a harnes to tie in,just hook up every wire color for color,except the grey back ,white black,green black and the violet black. leave them off to try it out. blue remote on wire from your aftermarket deck must be hooked up to the blue on the Metra harnes(this turns the amps on)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top