Cummins Diesel Forum banner

Engine pulleys and idelers

1019 Views 4 Replies 4 Participants Last post by  Beasty
Hello all in looking for a place to buy all new pulleys and idlers for the front of a 04.5 cummins I'm rebuilding since the motors down I wanted to see if I can just go back all new instead of transferring from the old motor thanks
1 - 1 of 5 Posts
I just changed a belt last week (green one)and figured I'd do the tensioner with one I had on the shelf while it was apart. (Gates I believe).

The actual belt tension was weaker than before the swaps. LOL
Belt holds just fine but I'd use genuine Cummins if possible.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.