Dodge Cummins Diesel Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hey guys I was driving my 2007 6.7l Cummins and suddenly my engine stopped working. All the electronics work fine engine itself is ok just won’t start!! Truck cranks but won’t start I don’t have any power going to my lift pump (in the tank) and all the glow plug light on dash board are gone. Also has (check gauges) light on. I checked there’s no error codes and the dealer said that my TIPM is bad. Please help I’m new to diesel trucks and have no idea where to start.
 

·
Registered
Joined
·
4 Posts
I have the same problem with my truck.
An i have a P1601 code on my mini max programmer . But if I hook up a obd2 scanner no code are shown.
Can any one help
 

·
Registered
Joined
·
11 Posts
Discussion Starter #5
I have the same problem with my truck.
An i have a P1601 code on my mini max programmer . But if I hook up a obd2 scanner no code are shown.
Can any one help
My problem was in the ECM I had to rebuild It and It works fine now.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #6
Hey guys I was driving my 2007 6.7l Cummins and suddenly my engine stopped working. All the electronics work fine engine itself is ok just won’t start!! Truck cranks but won’t start I don’t have any power going to my lift pump (in the tank) and all the glow plug light on dash board are gone. Also has (check gauges) light on. I checked there’s no error codes and the dealer said that my TIPM is bad. Please help I’m new to diesel trucks and have no idea where to start.
So to fix that I rebuild my ECM and my truck work just fine now.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #7
I have the same problem with my truck.
An i have a P1601 code on my mini max programmer . But if I hook up a obd2 scanner no code are shown.
Can any one help
I had to rebuild my ECM that was the problem with my truck
 

·
Registered
Joined
·
11 Posts
Discussion Starter #10
Company name is
A.C.S automobile computer solutions corp
They are located in Florida I had to ship It to them
 

·
Registered
Joined
·
11 Posts
Discussion Starter #13
Hey guys I was driving my 2007 6.7l Cummins and suddenly my engine stopped working. All the electronics work fine engine itself is ok just won’t start!! Truck cranks but won’t start I don’t have any power going to my lift pump (in the tank) and all the glow plug light on dash board are gone. Also has (check gauges) light on. I checked there’s no error codes and the dealer said that my TIPM is bad. Please help I’m new to diesel trucks and have no idea where to start.
Fixed my truck had to rebuild ECM
Company name is
A.C.S automobile computer solutions corp
They are located in Florida I had to ship It to them
Cost me 400$ plus shipping charges.
 
1 - 15 of 15 Posts
Top