Cummins Diesel Forum banner

egr cooler hose

1103 Views 5 Replies 5 Participants Last post by  Shibbyutman
im going to remove my cooler but when I took a close look at it I noticed when my truck was in the dealer for cel light repair they replaced my cooler and the coolant pipe with a 09 and up it no longer has the nipple on the pipe it is the newer o-ring type so i need to know if anyone knows where I can get a nipple to o-ring so I can by pass the cooler when it falls off. also does anyone the part number for a hose that looks like this in this kit.

Cummins EGR Cooler/valve delete block off kit 6.7 Dodge : eBay Motors (item 300391488776 end time Feb-04-10 10:03:03 PST)

if the url does not post it is on ebay item number 300391488776

I don't want to buy a kit cause im putting a ewg on and already have the other plates made just need those two pieces
1 - 2 of 6 Posts
I don't know if Buck's wastegate kit is setup for cooler delete on the 09.5+ trucks yet.
If it is one of my kits I warrant all parts for the lift of the vehicle. Shoot me a PM for a new hose if you'd like another. :thumbsup:
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.