Cummins Diesel Forum banner

Edge stacked with Superchips

512 Views 2 Replies 2 Participants Last post by  13jeeps
I had the Superchips programer installed and I just switched to the Juice with Attitude for the gauges and on the fly adjustment. I still have the Superchips and I miss the speedo adjustment and high idle enable.

Would I be able to program the ECM with Superchips stock programing with high idle enable and speedo adjustment without messing anything up with the Edge?

I was told not to stack the two but if I keep the Superchips on stock setting that should not mess anything up, right?
1 - 1 of 3 Posts
I think the Edge can do the speedo correction. Not sure on high idle though.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.