Dodge Cummins Diesel Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
I had the Superchips programer installed and I just switched to the Juice with Attitude for the gauges and on the fly adjustment. I still have the Superchips and I miss the speedo adjustment and high idle enable.

Would I be able to program the ECM with Superchips stock programing with high idle enable and speedo adjustment without messing anything up with the Edge?

I was told not to stack the two but if I keep the Superchips on stock setting that should not mess anything up, right?
 

· Registered
Joined
·
79 Posts
Discussion Starter · #3 ·
Yes, the edge does correct the speedo but only on the Attitude display not the truck's speedometer. The superchips programs new setting in the truck's ecm which turns on the high idle and changes the settings for the speedometer. Anyone knows if they are compatible at least as described above?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top