Dodge Cummins Diesel Forum banner
1 - 8 of 8 Posts

·
Cummins Fanatic
Joined
·
72 Posts
Discussion Starter · #1 ·
Ok, what's everyone's thoughts/takes on this combo? Edge Hot Juice W/ Attitude, Smarty, Quad Xzillaraider II.
I had a member suggest this and I am thinking about it. Fire away!
 

·
Registered
Joined
·
315 Posts
Isn't the quad a box as well? two boxes cannot be stacked to my knowledge...

Zach
 

·
Premium Member
Joined
·
1,178 Posts
The Quadzilla is a pressure box, if I am not mistaken. It will not add timing, which is normally the problem with stacking. It just ups the fuel rail pressure. So, It should be fine. I am running a Juice with Attitude, Edge EZ, and a Triple dog right now. No problems. Smarty is on the way. Triple dog will be coming off and smarty going on.
 

·
Cummins Fanatic
Joined
·
861 Posts
Thats just sick! You're a little nuts I think :peelout
 

·
Registered
Joined
·
2,165 Posts
Isn't the quad a box as well? two boxes cannot be stacked to my knowledge...

Zach
You can stack two boxes, just don't stack if they do the same, I had the edge j/a (timming and duration) stacked with a dr.p box (rail pressure), made a sweet stack.
 

·
Cummins Fanatic
Joined
·
72 Posts
Discussion Starter · #7 ·
Thats just sick! You're a little nuts I think :peelout
I Know. Aren't we all? Besides, why spend a butt-load of money on performance parts if you can't try to blow them up! The new HTS billet tranny is holding up fine so far.....but, needs more testing. Going to the Dyno Saturday, and got some Mickey Thompson 395/50R20's on the way with new wheels! It will already smoke all four duals with ease(posi)!:D
 

·
Premium Member
Joined
·
5,135 Posts
Ok, what's everyone's thoughts/takes on this combo? Edge Hot Juice W/ Attitude, Smarty, Quad Xzillaraider II.
I had a member suggest this and I am thinking about it. Fire away!
Personally I would scrap the juice and just run the smarty. JMHO.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top