[moparbubba]

I put together a dual fuel filter set up on ole shakey heres what i did
I started researching how i could run a better filter set up i already deleted the fuel heater and was running a fs1221 filter with my piston lift pump set up. Asked around came up with this
http://www.4btswaps.com/forum/showthread.php?10997-Dual-Fuel-Filters-Water-Seperator

And i went with this set up
http://www.1stgen.org/viewtopic.php?f=1&t=2801

Sent from my DROIDX

 

[moparbubba]

Sent from my DROIDX

 

[moparbubba]

Steady 10 psi at idle vs it bouncing with the fs1221 and ive gained a psi at wot

Sent from my DROIDX

 

[9297oldram]

All the offroad equipment I used to work on used that filter setup. You could have done something similar and mounted it on the frame rail.

 

[moparbubba]

Thats why i did every combine ive seen with a 6bt has that setup. And i don't like doing frame mounted filters more chance of fuel gelling cause i run no heater at least the block heater keeps this set up warm.

Sent from my DROIDX

 

[moparbubba]

https://www.youtube.com/watch?v=ifJRbGBNXow&feature=youtube_gdata_player
https://www.youtube.com/watch?v=HTw8Gv7QFlc&feature=youtube_gdata_player

Sent from my DROIDX