Cummins Diesel Forum banner

Dodge in-tank fuel pump retrofit install instructions

12671 Views 7 Replies 5 Participants Last post by  Norton
Hi,

I am looking for the 1998.5+ Dodge in-tank fuel pump retrofit install instructions. I would like to get these instructions in order to remove the kit from my truck. Thanks !
1 - 2 of 8 Posts
A drawstraw replaces the original pump. You could leave it if you install a sump pickup on the bottom of your tank. While I have no valid argument, I just don’t like the idea of having a fitting and fuel line from the bottom of the tank.
It’s actually illegal with gas tanks, but legal for diesels.

I don’t understand the problem... you just take it out. Access is by either unbolting and lifting the bed or dropping the tank.
Dropping the tank is so easy I don’t know why people hesitate, it’s just a piece of plastic.
I’ll vouch for the DrawStraw V, I put one in and can run my tank way down without starving it.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top