Cummins Diesel Forum banner

Dana 70 yoke question

1214 Views 4 Replies 3 Participants Last post by  CumminsCrew89
I have a 89 d-350 that has a bad spindle on the rear axle. I have a 85 model dana 70u dually rear that I bought to replace it with. My question is will the larger yoke originally from the 89 interchange on to the 85. Ive been told they will but I want to be 100% sure before I start tearing things apart. Thanks in advance.
1 - 5 of 5 Posts
The yokes should be the same you'll know when you take them off.

Welcome to CF
Thanks, Glad to be here.
Yes the yokes will swap over even a yoke from a dana 70 will fit a 60
Thanks for the info. guys hopefully have the 89 cummins truck sold this weekend
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.