Cummins Diesel Forum banner

Dana 60 Font axle Intermediate Shaft Play

432 Views 4 Replies 3 Participants Last post by  u2slow
Is there not supposed to be a collar to lock the intermediate shaft in place thats located in the pumpkin? I recently did my front seals and never removed one, im having issue with 4x so i opened the CAD and seen the splines on the end of the intermediate are wearing and that shaft can push in towards the pumpkin roughly 3/8"-1/2". Ive looked at parts list and one shows one but its discontinued and looking at new shafts i dont see a slot for a collar or the collar. When i engage 4x4 the front end makes a horrible banging noise, any help is appreciated.
1 - 2 of 5 Posts
Yea, i understand how the CAD works but i was seeing if there was a collar on the shaft end thats in the carrier assembly in the pumpkin to keep it from moving so much. Im just not quite sure where ive acquired this much play in that intermediate shaft. Im opening it up this weekend to see whats going on, would be nice to have 4x4 for the approaching winter. Cheers
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.