Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
i have a 04 3500 and it has a 4.5 lift i was running 35 X 12.50 with a little rubbing on the back of the wheel well and now i bought a new set of tires and all i can fit is a 35 X 11.00 and it just doesnt look as good i was wondering if anyone has trimmed the rear of the wheel well or knows where i can buy a set of cutouts thanks for the info
 

·
Registered
Joined
·
3,397 Posts
Longer control arms. Are you still running the stock arms? DO NOT CUT THE FENDERS!! I am, and LOTS of other people are, running 35x12.50's with only 2" of lift.
 

·
Registered
Joined
·
167 Posts
PLEASE DON'T CUT THE FENDERS! I run 305's with "no" lift.
 

·
Registered
Joined
·
167 Posts
Sorry that was 315's:lol3:
 

·
Registered
Joined
·
3,397 Posts
What kind of lift do you have? It should have come with longer arms to move the axle forward so the tires will be centered in the wheelwell.
 

·
Registered
Joined
·
398 Posts
there are no cut out flares for dodges. Best bet is the longer control arms or a different offset wheel. You running stock wheels? Personally I dont think you are cuz I had a leveling kit on my 06 with 35x12.50s on my stock 17s and I could NOT get the to rub even at full articulation and turning.

Joe E.
 
1 - 6 of 6 Posts
Top