Dodge Cummins Diesel Forum banner

condensor replacement

633 Views 4 Replies 3 Participants Last post by  willys99dodge
anybody done this? i have a manual and its pretty straight forward. just kinda curious about how to get the A/C lines disconnected. i pulled those C clip looking things and was baffled on how to proceed. do you really need a "special tool" to get them apart. going on my 3rd summer in louisiana with no A/C so i figure its about time to fix it. gunna replace the heater core while i'm in there.
1 - 5 of 5 Posts

· Registered
Joined
·
250 Posts
Discussion Starter · #2 ·
opps. missed a gear in my head, ment the evaporator.
 

· Registered
Joined
·
5,648 Posts
another note... have the system sucked out, before disconnecting anything, and if you are NOT replacing the air dryer (round cyl looking thing next to firewall) cap all connections or it will ruin the airdryer as it has a dissicant that removes moisture, and if left open it will be useless.

is your evap leaking??
 

· Registered
Joined
·
250 Posts
Discussion Starter · #5 ·
according to the dodge dealer it is but i take what they tell me with a grain of salt. gunna have it leak checked with die before i tear into it. it holds a charge for about a week.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top