[JTmurph00]

Looking at using their Ultimate 4 Link kit for the rear end of my truck (truck listed in signature). Does anyone have experience with the company or their products? I could only find two references to their steering kits on here.

Ultimate 4 Link Kit - Suspension Kits - Products - Chassis Unlimited

When doing this I would be ditching the leaf springs and shocks and installing their coilover mounts as well. For the front end I was originally planning on using DT Pro Fab radius arms and converting to front coil overs as well but Im actually considering their kit for the front end as well now.

I appreciate the knowledge and input everyone here has but really dont want to get into debates about coilovers.

Thank you

 

[Gator1]

That will work, but, there are better kits out there if you can weld.

 

[JTmurph00]

Such as? Gladly accept any recommendation.

That will work, but, there are better kits out there if you can weld.

 

[Gator1]

Ballistic has a better full length truss with their 4 link. Also if you're going with coil overs you can run links and longer shocks that mount to them instead of off the axle if you want a lot of travel.

 

[JTmurph00]

Thanks! I'll check them out as well. And congrats on finally selling those wheels

Ballistic has a better full length truss with their 4 link. Also if you're going with coil overs you can run links and longer shocks that mount to them instead of off the axle if you want a lot of travel.

 

[Satan's Chariot]

I know this is an older post.

You do know, to run triangulated uppers, you'll have to ditch your factory fuel tank too, right?