Dodge Cummins Diesel Forum banner

Changing out Valve Body tomorrow... Advice?

1116 Views 5 Replies 3 Participants Last post by  Rider9D
I am putting in my Goerend Valve Body tomorrow and the instructions that came with it aren't real good, is there a write up on this process or an online resource that could help me out a little better?

Also, how many quarts and of what kind of transmission fluid will I need to get? :confused013:

Thanks!
1 - 6 of 6 Posts

· Registered
Joined
·
54 Posts
Discussion Starter · #3 ·

· Registered
Joined
·
1,543 Posts
http://www.xtremediesel.com/manuals/bd/1030421.pdf

Did mine almost a year ago.

Do yourself a favor and drop the pan now and that way not as much fluid will be falling on you when you are trying to drop to the valvebody out.

Mine took a lot of fluid. Like 10 quarts. Can't remember exactly. Just be careful not to overfill.

Its not that tough. Just take your time.
 

· Northern CA Chapter President
Joined
·
3,301 Posts
http://www.xtremediesel.com/manuals/bd/1030421.pdf

Did mine almost a year ago.

Do yourself a favor and drop the pan now and that way not as much fluid will be falling on you when you are trying to drop to the valvebody out. Mine took a lot of fluid. Like 10 quarts. Can't remember exactly. Just be careful not to overfill.

Its not that tough. Just take your time.


:ditto::lol4:

i was covered in tranny fluid when i changed my solenoid.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top