Dodge Cummins Diesel Forum banner
1 - 1 of 36 Posts

· Premium Member
1,156 Posts
AWESOME job on this write up!

By the way, we like to use large ratchet straps under the axle when installing coils and track bars. That lets you support the axle, and easily raise and lower it as needed during the project. You can also use an additional ratchet strap to shift and axle over for an easy track bar alignment! We use the same method for the rear when installing leaf springs to wrangle everything into place while we hold the springs. An added bonus is that you need less jack stands with that method too!
1 - 1 of 36 Posts