[pattman92]

I just bought my 2005 dodge 2500 a couple months ago and i'm sure this gets asked thousands of times and i've already read way to many threads that go back and forth

the bds 6" kit says the max tire size can be up to 36" and in most cases 1" wouldn't matter but these vehicles seem to be sensitive with lifts tire sizes backspacing ect... all i need to know is if the bds long arm system will clear 37" tires preferably from someone who has the set up but any advice is appreciated

 

[Rpadar]

U should state what type of back spacing and width your are planning with your rims. Or if u intend to use stock rims. Will help those who know. I can't answer ur question. But the offset plays a huge part in clearance. Due to the tire swingin out when turned rather than pivoting if u know what I mean.
When I had clearance questions I just called up the local tire shop that sells rims and rubber to a ton of guys in the oil patch. They usaully know exactly what works and what doesn't with every type of lift on every truck as they sell tons of em. Just an idea
If your tire shop doesn't know. You could just grab the phone book and call a tire shop in oil country. Those guys sell a few sets of rubber to lifted deisels.
Grahams tire in Regina sk is an example. Ask for graham

Sent from AutoGuide.com App

 

[pattman92]

Thanks I'll try that.... and for everyone else as of right now I plan on using 20x10's with a -12mm offset

Sent from AutoGuide.com Free App