[0767fool]

I just got my Badp gen 2 delete kit in the mail today. Put everything on double checked then triple checked it all started it up and got the lightning bolt (electronic throttle control) light flashing and engine light on. Plugged in my scanner and it wont let me read the codes or clear them. Thought maybe i could drive it down the road and see what happens. COme to find out i only got about 25% throttle and thats it the whole time. Dont know what to do someone please help. Tryed unhookin the batteries for about 30 minutes and still the same thing checked all my fuses they were all good. I made sure the sensor wire by the side of the transmisson got spliced enough and left unplugged. I have no idea whats going on. Any ideas will help. Thanks

 

[0767fool]

Yes i got the updated harness. I called them yesterday and they are sending me a new harness and box so we'll see how it goes.

 

[0767fool]

Yes i left it unplugged it states in the instruction booklet they give you that it must be left unplugged or it could cause poblems and damage. i just put the new kit on and the etc (electroic throttle control light is still on but no engine light. any suggestions. Truck runs fine though. thanks guys