[rollingbignorcal]

I have a 2014 3500 laramie and need to know were the aux switch hook ups are . Are they behind the switch or in the fuse area. Just wanted to know becuase i already have a led light bar that i have a on a toggle switch and a train horn coming this week . So i want them on those switches . If anyone knows how they get wired in that would help out a lot. thanks:thumbsup:

 

[squish]

in for updates...

 

[rollingbignorcal]

Nothing no one:confused013:

 

[Calmc]

There are 2 connectors under the hood on the left fire wall, I will take a pic for you tomorrow.

 

[Calmc]

 

[Calmc]

 

[Calmc]

Truck should have come with the wiring kit to make connection at those connectors.

 

[rollingbignorcal]

Thanks for the pictures and the help.:thumbsup:

 

[rollingbignorcal]

I found the wire ports and i also found the bag filled with the wire harness but when you go to rambodybuilder.com it doesnt work for a wire setup. does anyone no what wires to use out of the bundle. thanks, or a different web site.:thumbsup:

 

[grporter]

what's the difference between the grey and white connectors?
how many aux switches can you control?

 

[rollingbignorcal]

My truck has 5 aux buttons in the truck on the center dash. I removed my wire harness that was in the bag and it was labeled for pto and aux switches so i dont know were to even start . But there is only 2 ports hopefully theu do all five aux buttons. Just need a good wire diagram or someone that has already done it to post pics .

 

[rollingbignorcal]

Ok i did some trouble shooting and found the ports that give 12v and all of the aux switches works. I hooked up my led light bar and my train horns to it . :thumbsup: Thanks for sending pics to get me started.

 

[rollingbignorcal]

The upper dark grey pack is aux 1-4 , top left is 1, left bottom 2 ,right top 3, right bottom 4. It seems that the light grey terminal is for the pto winch hook-up. :thumbsup:

 

[triden]

Are those connectors coming straight from the switches or are they going through relays?

 

[rollingbignorcal]

I don't know if they are going through a relay but my led light has a relay so it just sends a 12v signal from the terminal to the relay from the led light kit. It seems to work good for now with no issues yet.arty018: