Cummins Diesel Forum banner

Auto vs Man crank

3317 Views 8 Replies 6 Participants Last post by  Cekkent
Tried to search for the post about the difference between automatic crank and a manual crank but could not find it.
Is there a difference between the two and what about between an 03 and 06 crank?
1 - 4 of 9 Posts
Where the flywheel sides into the crank is different on the crank that was put into the engine during the rebuild. The shaft on the flywheel is about 2 1/8" and the place where it slides into is under 2".
It is because of the dual mass flywheel. I am going to use a regular flywheel and clutch.
They must have changed the crank in 06. That is the first year of the dual mass flywheel right?
1 - 4 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.