Cummins Diesel Forum banner

Audio upgrade

2469 Views 18 Replies 6 Participants Last post by  loghomeman
Starting to do the stereo in my truck. I currently have the infinity system in it now. I am going to get a double din dash bezel and put in a pioneer avh-p2400bt. I know I need an interface to connect it to the stock system. I was going to get the one that doesn't use the steering wheel controls. How much power does the factory amp have? I am going to use the factory speakers for now. And upgrade them after. What is the best way to configure the speakers in these trucks. I am thinking of front door speakers 6 x 9 and 3.5 in the dash and possibly adding a sub later. Would it be wise to bypass factory amp and amp the door speakers?
1 - 3 of 19 Posts
3.5's in the dash, 6x9 in the front doors, 5.25's in the rear doors.

No point in keeping the dash speakers really. Look at Metra for the wiring harness adapter for aftermarket deck to stock wiring to aftermarket.
Put em in the rear doors, and get a good set of 6x9's or 6.5's for the front doors. Put the JBL on all 4, get a second amp for sub.
Prefab boxes are fine if you buy a sub to match the airspace. Space is space.
1 - 3 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.