Cummins Diesel Forum banner

Anybody seen this before?

1060 Views 11 Replies 5 Participants Last post by  Hooey
Hello All,
Was working on my 2nd gen at school inspecting the front brakes. I looked up and noticed that the frame piece below the upper cross arm has a crack in it. Very close to the bump stop. Has anybody had this happen to them?

See less See more
1 - 1 of 12 Posts
It is the coil spring tower that was recalled.
Both my 4 and 2wd had the recall. It was pretty involved, required a certified welder, my dealer didn't have one and had to send it out.
Details> Recall 835 Coil Spring Tower Reinforcements

See less See more
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.