Dodge Cummins Diesel Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hello All,
Was working on my 2nd gen at school inspecting the front brakes. I looked up and noticed that the frame piece below the upper cross arm has a crack in it. Very close to the bump stop. Has anybody had this happen to them?

 

· Registered
Joined
·
209 Posts
Just dawned on me that's two wheel drive, with the zoomed out pic it looks like the upper control arm. When I first looked i thought it was the spring tower. Mine was recalled for supports to be welded in. Still wouldn't hurt to call ande check though and see if there's any recalls or updates. Sorry I should have asked for better pics
 

· Premium Member
Joined
·
12,665 Posts
I'm gonna have to check my piece out in the morning...but I ain't gonna get it done anytime soon...needs a front end over haul too so I'll wait till I can afford all that ish too...

Sent from my Droid Charge while struggling with this $#!++¥ samsung swype keyboard
 

· Registered
Joined
·
1,312 Posts
I'm gonna have to check my piece out in the morning...but I ain't gonna get it done anytime soon...needs a front end over haul too so I'll wait till I can afford all that ish too...

Sent from my Droid Charge while struggling with this $#!++¥ samsung swype keyboard
I'm with you there. I need a new upper control arm on the drivers side!
 

· Registered
Joined
·
1,312 Posts
You should hear my truck driving...damn front end is louder than the motor at slow speeds

Sent from my Droid Charge while struggling with this $#!++¥ samsung swype keyboard
Mine too man! Mines that dam leveling kit. Seems to cause nothing but problems for me
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top