Dodge Cummins Diesel Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
910 Posts
I put one on my 12 and one on my friends 09. After learning how to do it on my 12 it probably took 30 minutes tops to put on the 09.

It's very easy and is 100% bolt on. If you decide to get rid of the truck you can take it off and return to stock in about 15 minutes.

It filters after the stock fuel filter and just before the cp3.


 

·
Registered
Joined
·
910 Posts
It fits with a stock truck but it's tight, also the Fleetguard filter that comes with the kit I had an issue with it hitting the throttle valve but it was very slight.

As far as filtering and water separation that would depend on the filter you run. The Cat filter is not a water seperator. I have 10k on this filter. I think I'll change it every 15 or 20k. No scientific reasons just personal gut feeling.

The kit is well worth it even if it's stock. CR injectors are very particular about clean fuel. Dirt and water is the enemy.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top