[jigabop]

I think I speak for most AirDog150 owners...
Where do we get this upgraded fuel module/canister, and how much?!?!?!?!?!?!!!!!

I am pretty sick of my fuel gauge saying 1/2 tank left(really 1/4 tank...gauge goes slow the first 1/2 and fast the 2nd 1/2) and seeing my fuel pressure gauge bounce all over the place when on a hill because the draw straw is sucking air.

 

[Fishin2Deep4U]

Do you have an in tank pump? If not, use the DrawStraw 1. It works every time. Still has to be installed correctly, but allows for returned and suction to be taken from the module.

If you had an in tank pump, use the DrawStraw V. Too easy to install and also works every time!

Dave

 

[D.Nel928]

Don't wanna Hijack this but when ordering the DS1 it gives you the option of "fuel supply line connection" and two different sizes, which one is needed for the AD150?

 

[Fishin2Deep4U]

Don't wanna Hijack this but when ordering the DS1 it gives you the option of "fuel supply line connection" and two different sizes, which one is needed for the AD150?

1/2"

3/8" is for the FASS systems.

Dave

 

[jigabop]

jeebus $200 for a draw straw that actually works eh? sucky.

 

[Sandman76]

Can get the fuel cannister upgrade from any PureFlow vendor. About $60.