Cummins Diesel Forum banner

Air Ride

1076 Views 9 Replies 5 Participants Last post by  dieseltime
3
I'm in the process of building 4-link for my '08. I was building it for my '99, changed some things for my '06. Sold it and bought an '08. Maybe I will actually get it done before I get my next truck :lol3:

I am always looking for suggestions, ideas, tips, hints, etc.

Only have the front's done. Everything else is measured three times, and drawn out for a fabber to cut. I will tack everything and have it all professionally welded. My little Mig doesn't do it.

I'm using Firestone 2107s, 3500 pound capacity, 9" max diameter. Lift is 4" overall, with 2" extra in front to level it out.

Front right side view



Bottom-The two tabs will have a hole drilled in them and will mount in the lower shock mount bracket.



Top. The space with the machine nut is where the stock upper spring mount will sandwich between the new upper shock tower and new upper air bag mount.

See less See more
1 - 2 of 10 Posts
Were you just sharing or have a question, either way nice work, I'm headed down that road too.
:thumbsup
I'm thinkin firestone tripples and 1" air lines with my Oasis air, runnin cross tanks with little loss,or nitro. Also I like 4 to 12 range with quick action/lift. God luck on yours and lets see a tech article on it.:thumbsup
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top